Mirka Glass Sanding & Polishing Kit with Case

Determining the correct grit can be challenging, as it depends on how deep the scratch is. Start sanding with a fine grit, eg. 320 grit, or just polish out the scratch. If the fine grit does not sand enough, use the next coarser grit. This way, you can avoid additional steps when removing the scratches.

The fewer steps necessary to get the job done, the better. Otherwise, there is a risk of optical refraction. The polishing step takes longer than the sanding steps.

• When sanding, keep the machine flat to surface, this will give a better and smoother finish.
• Clean in between the steps to avoid dust from previous steps causing additional scratches.
• Always use a dust protection mask.
• Always start the process by cleaning the surface using window cleaning liquid. Clean the window with e.g., IPA (Isopropanol) and glass cleaner. We recommend you to use both, since they remove different kind of dirt or grease.
• Use foam tape to limit splashing.
• Clean the surface in between every step to remove the dust from the previous step and avoid the dust creating any scratches.
• When using the Mirka Deros RS 600, or any suitable sanding machine, set it to its lowest speed, around 1100 rpm. Keeping the speed low helps to control surface temperature.
• Throughout the entire process, do not touch the glass with bare fingers, as transferred grease will affect the result and in worst case fingerprints will be visible. Use gloves!
• Take sufficient time over each sanding step, it is all about giving each step the time it needs.

• DEROS RS 600 Sander
• Mirka Backing Pad 125mm 5/16" Grip 28H – Medium
• Abralon Foam Abrasive Discs 125mm Coarse Grits 20 Pack
• Polarshine E3 Glass Compound
• Felt Polishing Pads 125mm 2 Pack
• Mirka 1230 M Dust Extractor (230V)
• Mirka Sleeve + Cable 230V + Hose 10m AN
• Deep Storage Case

• Restores scratched, scuffed and graffiti-marked glass to a clear, smooth finish.
• Saves money and time by repairing glass instead of replacing it.
• Professional step-by-step solution, suitable for both deep scratches and light marks.
• Covers up to 1m² of glass per kit with abrasives and compounds. (Consumables on the polishing kit)
• Delivers dust-free sanding for a cleaner and safer work environment.
• Lightweight and ergonomic system, reducing operator fatigue during use.
• Eco-friendly option that reduces waste by extending the life of glass panels.

RS 600 SANDER

Connectivity: Bluetooth
Dust System: Central vacuum ready
Max Speed: 2500 rpm
Min Speed: 700 rpm
Noise Level, LpA: 61.0 dB
Orbit Type: Rotary
Pad Diameter: 150 mm
Pad Included: 8292605011
Power Input: 750 W
Vibration Level: 1.6 m/s²
Voltage Supply: 220-240 VAC
Weight: 1.8 kg

1230 M DUST EXTRACTOR

Dust Class: M
Dust Container Volume: 30.0 L
Voltage main supply: 220-240 VAC
Dimensions: H 565 mm x L 565mm x W 385 mm
Mains Frequency: 50/60 Hz
Noise Level, LpA: 59.0 dB
Power Input: 1200 W
Vacuum: 250.0 mbar
Air flow volume: 4500.0 l/min
Weight: 14.5 kg
Type: Automatic Filter Cleaning
Hose included: No
Anti-static: Yes