Price includes GST.
Shipping calculated at checkout.
No reviews
*Any discounts are applied at checkout
THIS PRODUCT IS A BULKY ITEM AND IS EXCLUDED FROM THE FREE SHIPPING OFFER
Couldn't load pickup availability
Why replace damaged glass when you can repair it? The Mirka Glass Sanding & Polishing Kit restores scratched, graffiti-marked and scuffed glass panels.
This kit is suited to glass with minor scratches that only require Abralon to remove. Abranet SIC NS is available for separate purchase.
This kit also does not include microfibre cloths, which are required for cleaning before and after sanding and also in between sanding steps.
Mirka 1230 M Dust Extractor (230V) – Powerful dust control with sleeve, cable and 10m hose for clean, safe operation.
Mirka Sleeve + Cable 230V + Hose 10m AN
Mirka Deep Storage Case
Additional Information
Determining the correct grit can be challenging, as it depends on how deep the scratch is. Start sanding with a fine grit, eg. 320 grit, or just polish out the scratch. If the fine grit does not sand enough, use the next coarser grit. This way, you can avoid additional steps when removing the scratches.
The fewer steps necessary to get the job done, the better. Otherwise, there is a risk of optical refraction. The polishing step takes longer than the sanding steps.
When sanding, keep the machine flat to surface, this will give a better and smoother finish.
Clean in between the steps to avoid dust from previous steps causing additional scratches.
Always use a dust protection mask.
Always start the process by cleaning the surface using window cleaning liquid. Clean the window with e.g., IPA (Isopropanol) and glass cleaner. We recommend you to use both, since they remove different kind of dirt or grease.
Use foam tape to limit splashing.
Clean the surface in between every step to remove the dust from the previous step and avoid the dust creating any scratches.
When using the Mirka Deros RS 600, or any suitable sanding machine, set it to its lowest speed, around 1100 rpm. Keeping the speed low helps to control surface temperature.
Throughout the entire process, do not touch the glass with bare fingers, as transferred grease will affect the result and in worst case fingerprints will be visible. Use gloves!
Take sufficient time over each sanding step, it is all about giving each step the time it needs.
Restores scratched, scuffed and graffiti-marked glass to a clear, smooth finish.
Saves money and time by repairing glass instead of replacing it.
Professional step-by-step solution, suitable for both deep scratches and light marks.
Covers up to 1m² of glass per kit with abrasives and compounds. (Consumables on the polishing kit)
Delivers dust-free sanding for a cleaner and safer work environment.
Lightweight and ergonomic system, reducing operator fatigue during use.
Eco-friendly option that reduces waste by extending the life of glass panels.
SPECIFICATIONS
RS 600 SANDER
Connectivity: Bluetooth
Dust System: Central vacuum ready
Max Speed: 2500 rpm
Min Speed: 700 rpm
Noise Level, LpA: 61.0 dB
Orbit Type: Rotary
Pad Diameter: 150 mm
Pad Included: 8292605011
Power Input: 750 W
Vibration Level: 1.6 m/s²
Voltage Supply: 220-240 VAC
Weight: 1.8 kg
1230 M DUST EXTRACTOR
Dust Class: M
Dust Container Volume: 30.0 L
Voltage main supply: 220-240 VAC
Dimensions: H 565 mm x L 565mm x W 385 mm
Mains Frequency: 50/60 Hz
Noise Level, LpA: 59.0 dB
Power Input: 1200 W
Vacuum: 250.0 mbar
Air flow volume: 4500.0 l/min
Weight: 14.5 kg
Type: Automatic Filter Cleaning
Hose included: No
Anti-static: Yes
SUITABLE FOR
Polishing minor or deep scratches on glass as well as acid etched grafitti. Effective on tempered & non-tempered glass.
I was rather impressed with ceramic discs in my orbital sander that I used, to sand down the river table I am making. I started with 40 grit and finished with a 1000grit. I was surprised how quickly the discs cut the timber and the epoxy resin and the discs lasted very well too. Superb finish, very happy. I will be using these discs again.
Naturally we’d like them to last longer, but we get between 250 - 350 square metres out of a pad generally… they make it easier to control your machine as it isn’t as hard on the walls. We trialled it for a bit and now it’s the standard for us to continue to use them…
Absolutely stellar customer service, well above par and enjoyable as much as helpful, and the products are 10/10 - will be back again and again and again…
Mirka Roundy Hand Sanding Block Kit
Ian Douglas
Mirka AROS-B is a sensational sander that will save untold time and effort!
I spend hours on manually sanding the curves in the depressions I route in my charcuterie boards as there's just no other way to do it, using the AROS-B sander I can now do a full board in around 20 minutes and then have it ready to oil! I estimate it's saving me at least 3-4 hours per board.
Expensive tool but it reall works fantastic with a lot of grunt, and saves an incredible amount of time and effort! I love it so much a week later I bought the AOS-B as well!
Couldn't recommend this unique sander highly enough for fiddly awkward sanding jobs!
I received my mixed box of 125mm Mirka Galaxy discs from Best Abrasives a little while ago...that stuff is amazing!
I let the 80 grit go on a piece of rough sawn Camphor Laurel and it was smooth in a couple of minutes. Very impressive compared to other brands...I'll be back for more! 🙂
Mirka Galaxy Sanding Discs - 125mm/5"
Jarrod Renouf
Mirka Sleeve + Cable 230V + Hose 10m AN
Mirka Sleeve + Cable 230V + Hose 10m AN
Don Messenger
Mirka Abranet Ace Ceramic sanding discs
I was rather impressed with ceramic discs in my orbital sander that I used, to sand down the river table I am making. I started with 40 grit and finished with a 1000grit. I was surprised how quickly the discs cut the timber and the epoxy resin and the discs lasted very well too. Superb finish, very happy. I will be using these discs again.
